4,000 Sq. Ft. Commercial Pool Protected by MicroGlass
pool age
Brand new replaster
LOCATION
Southern CA
finish type
Smooth Troweled White Plaster
MicroGlass Applicator & Reseller
Pool Remodeling Company
project overview
This 4,000 square foot commercial pool was protected by MicroGlass after a replaster. The plaster was troweled over the course of 2 days, and MicroGlass was applied after final set of the last section. Because MicroGlass delivers water to the plaster matrix, the surface did not craze-crack even though the pool was not filled right away.
About the MicroGlass Install
Given the size of this project, the contractor used a battery-powered airless paint-sprayer (as seen in some of these photos). This inexpensive pump was purchased from a big-box hardware store, was quickly assembled.
Immediate & Long-Term MicroGlass Benefits:
The MicroGlass benefits were immediately seen at startup. On this project, the 4,000 sq. ft. pool was replastered, as well as a smaller wader pool. The wader pool did not receive a MicroGlass treatment. The table below outlines the differences between the initial readings after the pools were allowed to fill from the same source. Because the main pool was protected by MicroGlass, this commercial property owner will get more longevity out of the finish, and less damage caused by aggressive water chemistry used in the commercial pool environment.
Startup Characteristic
4,000 Sq. Ft. Main Pool
(with MicroGlass)
Wader
(No MicroGlass)
Plaster Dust
Minimal
Excessive
Total Alkalinity
150
200
Calcium Hardness
140
220
ready to give your new pool a microglass protect?
Works great both on Residential and Commercial Pools.